Everyware supports wired and wireless integrated terminals for merchants to accept in-person payments at the point of sale. For startup instructions on the wired payment terminal, see Payment Terminal Startup Guide (Wired).
👆 A merchant must be approved for card present processing in order for Everyware to provision and process payments through integrated terminals. Please contact your sales representative to see if your account is approved for card present processing.
Steps to Set Up Your Integrated (Wireless) Payment Terminal
Follow these quick steps to start using your integrated Link 2500 Ingenico payment terminal.
Ingenico Link 2500 Set Up Step by Step
3. Inside the Admin Menu, Use F2 and F3 function keys to scroll. Select Communication Type > Inside the Communication Type menu, select Option 4 - WIFI
4. Navigate back to the Admin Menu using the Yellow back button. Inside the Admin Menu, select option 2 - WIFI Parameters > Inside the Wifi Parameters menu, select option 2 - Scan Networks
👆 If this is the first time setting up the device with a Wifi network or a code is not shown on the device, you may need to restart the device > hold the left green button and the yellow button above it at the same time for about one second until the ‘Shutdown In Progress’ screen is shown > Hold down the green button to power back on.